GMC chervolet camaro 1999 Service Manual page 305

2-74 Steering Wheel and Column - Tilt
290411
Steering
Installation Procedure
1. Position the shaft (5) to the column (3).
Notice:
Refer to Fastener Notice in Cautions
and Notices.
2. ,lns1au the boltlscrew (3).
Tighten
Tighten the bolVscrew (3) to 47 N·m (35 lb ft)·.
3'. Position the shaft (5) to the gear (8).
4. Install the bolt/screw (1 O).
Tighten
. Tighten the bolt/screw (10) to 47 N·m (35 lb ft).
5. lnstal.1 the boot (12) to the shaft (5).
6. Use .a clamp (11) in order to secure the boot
to the shaft.
7. Position the shield (14) to the shaft (5) and
column (3) on 5.7L VIN G only.
8. On 5.7L VIN
G
only, insert the button into the hole
in the column (3) in order to install the shield (14).
(