Adjustable Throttle And Brake Pedal; Engine Coolant Heater - GMC Yukon Denali 2006 Manual

Adjustable Throttle and Brake Pedal

If your vehicle has this feature, you can change the
position of the throttle and brake pedals. This feature is
designed for shorter drivers, since the pedals cannot
move farther away from the standard position, but can
move closer to you for better pedal reach. This
feature can be programmed to work with the memory
function (if equipped) on your vehicle. See Memory Seat
on page 2-49.
The vehicle must be in PARK (P) for this feature
to operate.
Press the button closest to you to move the pedals
closer to you. Press the button farthest from you to
move the pedals away from you.
The buttons used to
adjust the pedals are
located on the driver's
side door panel.

Engine Coolant Heater

Your vehicle may be equipped with an engine
coolant heater.
In very cold weather, 0°F (−18°C) or colder, the engine
coolant heater can help. You will get easier starting
and better fuel economy during engine warm-up.
Usually, the coolant heater should be plugged in a
minimum of four hours prior to starting your vehicle.
At temperatures above 32°F (0°C), use of the coolant
heater is not required. Your vehicle may also have
an internal thermostat in the plug end of the cord.
This will prevent operation of the engine coolant heater
when the temperature is at or above 0°F (−18°C) as
noted on the cord.
2-19