GMC chervolet camaro 1999 Service Manual page 157

1-66 HVAC System - Manual
187363
157218
HVAC
8. Place a feeler gage between the clutch plate and
the clutch rotor.
Important: Make sure that the air gap is even all \.
around the clutch plate and hub assembly.
9.
Tighten the hex portion of the
J
33013-8 until the
air gap between the clutch plate and clutch rotor
is 0.40 mm (0.015 in).
10. Remove the J 33013-8.
11. Hold the clutch plate and hub assembly (2) With
the
J
33027-A.
12.
Install the compressor shaft nut.
Tighten
Tighten the compressor shaft nut to
17.5 N,m (13 lb ft).
13. Spin the pulley rotor by hand to make sure the (
rotor is not rubbing against the clutch drive plate. ·
14. Remove the compressor from the J 41790.
15. Install the compressor into the vehicle.