Turn Signal Difficult To Operate; Hazard Switch Cannot Be Turned Off; Hazard Switch Does Not Stay On; Ignition Switch Electrical System Does Not Operate - GMC chervolet camaro 1999 Service Manual

Steering Steering Wheel and Column - Tilt 2-65
Turn Signal Difficult to Operate
Problem Action
The tum signal is difficult to operate. Inspect for the following conditions:
• A loose turn signal switch arm
• Loose springs
• Misplaced springs
• Foreign parts or material
• Loose turn signal switch mounting screws
Replace the switch if the following conditions exist:
• A broken yoke
• A distorted yoke
Hazard Switch Cannot Be Turned Off
Problem Action
The hazard switch cannot be
1. Inspect for foreign material between the hazard support canceling leg
turned off.
and the yoke.
2. Replace the turn signal switch if no foreign material is found.
Hazard Switch Does Not Stay On
Problem
Action
The hazard switch will not stay on or
1. Inspect the steering column for the following conditions:
is difficult to tum off.
• A loose turn signal switch
• Interference with other components
• Interference from foreign material
2.
Replace the turn signal switch if none of the above conditions are found.
Ignition Switch Electrical System Does Not Operate
Problem
Action
The electrical system does not Inspect the steering column for the following conditions:
function properly.
• A damaged ignition switch
• An improperly adjusted ignition switch
• A loose connector at the ignition switch
Ignition Switch Does Not Turn
Problem Action
The ignition switch does not turn. Inspect the steering column for the following conditions:
• A damaged ignition switch
• An improperly adjusted ignition switch
• A loose connector at the ignition switch
Ignition Switch Cannot Be Set Correctly
Problem
Action
The ignition switch cannot be Inspect the steering column for the following conditions:
correctly set.
• A deformed switch actuator rod
• A sector to rack engaged in the wrong tooth
)