GMC chervolet camaro 1999 Service Manual page 148

HVAC
Compressor Clutch Coil Removal
(V7 - Direct Mount)
Tools Required
• J 8433 Compressor Pulley Puller
• J 8433 - 3 Forcing Screw
• J 33023-A Puller Pilot
• J 33025 Clutch Coil Puller Legs
• J 41790 Compressor Holding Fixture
1. Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture, J 41790 in
a vise and attach the compressor to the J 41790.
3. Remove the compressor clutch plate and hub
assembly. Refer to Compressor Clutch Plate and
Hub Assembly Removal (V7 - o;rect Mount).
4. Install the J 33023-A onto the front head of the
compressor.
5. Remove the compressor rotor and bearing
assembly. Refer to C,utch Rotor and/or Bearing
Removal
(Vl -
Direct Mount).
6. Mark the clutch coil terminal location (2) on the
compressor front head.
7. Install the J 33025 onto the J 8433.
8. Install the J 8433 onto the compressor clutch
coil (1) and tighten the puller leg bolts.
9. Tighten the center forcing screw J 8433 - 3 of the
compressor pulley puller J 8433 against the
J 33023-A to remove the compressor clutch coil
from the compressor.
10. Remove the J 8433 - 3, the J 33023-A, the J 33025
and the J 8433.
HVAC System - Manual 1-57
157595
157224
J8433-3
J8433
157234