GMC chervolet camaro 1999 Service Manual page 542

Brakes
Notice:
Refer to Fastener Notice in Cautions and
Notices.
7. Install the front brake caliper guide pin bolts.
Tighten
Tighten the front brake caliper guide pin bolts to
31 N·m (23 lb ft).
8.
If the following components were removed, install
them onto the caliper housing using new copper
gaskets:
• The brake hose fitting
• The brake hose
Tighten
Tighten the front brake hose fitting to
40 N·m (30 lb ft).
9. Install the tire and the wheel. Refer to Tire and
Wheel Removal and Installation (Wheel
Installation) in Tires and Wheels.
1 O. Lower the vehicle.
Important:
If the brake hose was removed, bleed the
caliper. Refer to Hydraulic Brake System Bleeding
(Manual Bleed)
11. Fill the master cylinder reservoir to the proper
level with clean brake fluid.
12. With engine running, pump brake pedal until firm
brake pedal is attained.
13. Check for leaks.
Disc Brakes 5-67
63984
373249