GMC chervolet camaro 1999 Service Manual page 863

6-80 Engine Mechanical - 3.8 L
1
. Engine
Installation Procedure
1. Apply thread lock adhesive GM P/N 12345493 or
equivalent, to the valve rocker arm cover bolt
threads.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the valve rocker arm cover
(1 ).
3.
Tighten the valve rocker arrn cover bolts.
Tighten
Tighten the valve rocker arm cover bolts to
10
N-m
(89
lb in).
4. Install the ignition control module bracket.
5. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
6. Install the rear ignition control module
bracket bolts.
31442
Tighten
439823
Tighten the rear ignition control module bracket
bolts to 50 N-m (37 lb ft).
7. Lower the vehicle.
8. Install the engine lift bracket (2) to the cylinder
head studs.
9. Install the top ignition control module bracket bolt.
Tighten
Tighten the top ignition control module bracket
bolt to 50 N-m (37 lb ft).
10.
Install the oil level indicator tube. Refer to Oil
Level Indicator and Tube Replacement.
(
(
\