Power Steering Gear Replacement - GMC chervolet camaro 1999 Service Manual

2-32 Power Steering System
290561
1
3
2
354423
Power Steering Gear Replacement
Removal Procedure - 5.7L VIN G
1. Remove the air intake resonator.
2. Remove the serpentine belt. Refer to
Steering
Drive Belt Replacement (Accessory) in Engine
Mechanical
-5.
7L.
3. Support the engine with a hydraulic jack.
4. Raise and support the vehicle. Refer to Lifting and
Jacking the Vehicle in General Information.
5. Remove the tires and wheels. Refer to Tire and
Wheel Removal and Installation (Wheel Removal)
in Tires and Wheels.
6. Place a drain pan under the steering gear (5).
7. Disconnect the steering gear outer tie rods.
8. Remove the generator. Refer to Generator
Replacement (5.7L) in Engine Electrical.
9. Remove the left-side engine mount through bolt.
1 O. Lower the vehicle.
11. Raise the engine with the hydraulic jack.
12. Disconnect the following hoses from the
steering gear (5):
• The power steering gear inlet hose
• The power steering gear outlet hose
13. Remove the steering gear flexible coupling from
the steering gear (5). Refer to Intermediate
Steering Shaft Replacement in Steering Wheel
and Column.
14. Remove the nuts (4) and bolts/screws (1).
15. Remove the steering gear (5).
Removal Procedure - 3800 VIN K
1. Place drain pan(s) under vehicle under steering
gear and pump.
2. Raise and suitably support vehicle. Refer to Lifting
and Jacking the Vehicle in General Information.
3. Remove power steering gear inlet (3) and
outlet (2) hoses from steering gear (1 ).
(