GMC chervolet camaro 1999 Service Manual page 199

1-108 HVAC System - Manual
282916
282922
282920
HVAC
4. Install the HVAC control.
Notice:
Refer to Fastener Notice in Cautions and
Notices.
5.
Install the HVAC control bolts.
Tighten
Tighten the HVAC control bolts to
2.2
N-m
(19
lb in).
6. Install the accessory trim plate.Refer to Bezel
Replacement - IP Cluster (Chevrolet) or Bezel
Replacement - IP Cluster (Pontiac) in Instrument
Panel, Gauges and Console.
Temperature Control Cable Replacement
Removal Procedure
1. Remove the right 1/P insulator. Refer to Insulator
Replacement - IP (Right Side) in Instrument
Panel, Gauges and Console.
2.
Remove the temperature control cable bolt.
3. Disconnect the temperature control cable at the
A/C module.
4. Remove the accessory trim plate. Refer to Bezel
Replacement - IP Cluster (Chevrolet) or Bezel
Replacement - IP Cluster (Pontiac) in Instrument
Panel, Gauges and Console.
5. Remove the HVAC control bolts.
6. Pull the HV AC control out of the 1/P far enough to
access the temperature control cable connection.
7. Remove the temperature control cable from the
control.
8. When releasing the control cable clips, use a
small screwdriver to gently pry the cable from
the control.
(