Drive Belt Tensioner Replacement - GMC chervolet camaro 1999 Service Manual

)
)
Engine
Installation Procedure
1. Route the drive belt (1) around the pulleys.
2. Position a hex-head socket on the belt tensioner
pulley bolt.
3. Rotate the drive belt tensioner (2) clockwise to
relieve the tension.
4.
Install the drive belt
(1)
onto the drive belt
tensioner (2).
5. Inspect the drive belt (1) to ensure that the belt is
properly aligned into the grooves of the pulleys.
6.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnect/Connect in
Engine Electrical. ·
Drive Belt Tensioner Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Cautipn in
Cautions and Notices. · · ·
1 . Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnect/Connect in
Engine Electrical.
2. Drain the engine coolant. Refer to @raining and
Filling Cooling System (3.8L) in Engine Cooling.
3. Remove the drive belt. Refer to Drive Belt
Replacement.
4. Remove the generator. Refer to Generator
Replacement (3.8L) in Engine Electrical.
Engine Mechanical - 3.8 L ,6-39
41363
208241
208241