Stabilizer Shaft Replacement - GMC chervolet camaro 1999 Service Manual

)
Suspension
5. Position the torque arm (5) to the rear axle (1).
6. Install the bolts (2), the washers (3) and the
nuts (4).
Tighten
Tighten the nuts (4) and bolts (2)to
132 N·m (97 lb ft).
7. Install the torque arm (1) to the propeller shaft (2),
if equipped with a two piece propeller
shaft (3800 VIN K) only. Refer to Propeller Shaft
Description to Propeller Shaft.
8. Remove the adjustable rear axle support.
9. Lower the vehicle.
Stabilizer Shaft Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Remove the nut and bolt assembly.
3. Remove the stabilizer shaft link nut. Refer to
Stabilizer Shaft Link Replacement.
Rear Suspension 3-51
181239
1
483066
490099