Tie Rod End Replacement - Outer - Off Vehicle - GMC chervolet camaro 1999 Service Manual

Steering
4. Install the cylinder line assemblies (1) to the gear
assembly (2).
': Notice:
Refer to Fastener Notice in Cautions
and Notices.
Tighten
Valve end fittings to 16.9 N·m (12.6 lb ft).
Cylinder end fittings to 27 N,m (20 lb ft).
Important: Flush and bleed power steering system
(hoses, reservoir and cooler lines) with power steering
fluid GM Part #1050017 (or equivalent meeting
GM Specification #9985010).
Flush and bleed power steering system.
Refer to Bleeding Power Steering System.
Tie Rod End Replacement -
Outer - Off Vehicle
Disassembly Procedure
Tools Required
J
24319 - 01 Universal Steering Linkage Puller
1. Pull the cotter pin (3) and the hex slotted nut (2)
from outer tie rod assembly (1 ).
2. Loosen the jam nut (2) on the inner tie rod
assembly (1 ).
Power Steering System 2-41
1
423417
423439
3
297349