GMC chervolet camaro 1999 Service Manual page 517

5-42 Hydraulic Brakes
184635
Brakes
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and
Notices.
1. Install the brake hose (3) and the brake hose
fitting bolt/screw (8) to the rear axle (4).
Tighten
Tighten the rear brake (center) hose fitting
bolt/screw (8) to 21 N-m (15 lb ft).
2. Install the left rear pipe (1) and the right rear
pipe (5) to the brake hose (3).
Tighten
• Tighten the left rear pipe (1) and the right rear
pipe
(5)
at the rear brake (center) hose
(3)
to
24 N-m (18 lb ft).
• Tighten the left rear pipe
(1)
and the right
rear pipe (5) at the left hand brake hose
to
17
N-m
(13
lb ft).
3. Install the brake hose (3) into the brake hose
bracket (6). Ensure that the brake hose (3) is
properly seated and not twisted.
4.
Install the rear brake hose retainer
(7)
to the rear
brake hose bracket (6) and the brake hose (3).
5.
Install the rear brake front pipe
(2)
to the
brake hose (3).
• Use a backup wrench on the brake hose (3).
• Do not bend the brake hose bracket (6) or
the rear brake front pipe (2).
Tighten
Tighten the rear brake front pipe (2)
to the rear brake (center) hose (3) to
15 N-m (11 lb ft).
6. Bleed the brake hydraulic system. Refer to
Hydraulic Brake System Bleeding (Manual Bleed)
or Hydraulic Brake System Bleeding (Pressure
Bleed) or Hydraulic Brake System Bleeding (When
To Bleed).
7. Lower the vehicle.
(
(