Steering Wheel Replacement - GMC chervolet camaro 1999 Service Manual

2-72 Steering Wheel and Column - Tilt
6
5
290322
1
2
3
5
290184
Steering
Installation Procedure
1 . Install the wire harness connector (3) to the
control(s). (,
2. Install the radio control switch (5) to the steering
wheel (7).
3. Install the radio control wire harness retainer.
Steering Wheel Replacement
Removal Procedure
Tools Required
• J
1859-A Steering Wheel Puller
• J
38720 Steering Wheel Puller Bolts
1. Remove the nut (3).
2. Remove the horn lead (5).
Notice: When removing the steering wheel, use only
the specified steering wheel puller. Under no conditions
should the.end of the steering column shaft be
hammered on, as hammering could loosen the plastic
injections which maintain steering column rigidity.
Notice: When attaching
J
1859-A and
J
38720
to the steering wheel, use care to prevent threading
J
39720 (bolts) all the way through the steering wheel
hub into the SIRcoil and damaging the SIR coil.
3. Use a
J
1859-A and a
J
38720 in order to remove
the steering wheel (2).
4.
Remove the steering wheel horn switch.
I
r
\
(