GMC chervolet camaro 1999 Service Manual page 145

1 .. 54 HVAC System - Manual.
J 8092
210141
157595
157223
HVAC
7. Support the rotor hub in order to prevent damage
to the pulley rotor during bearing removal.
7.1. Remove the forcing screw from the J 33020.
7.2. With the tangs of the J 33020 still engaged
in the rotor slots, invert the assembly onto a
solid, flat surface or blocks.
Notice: It is not necessary to remove the staking in
front of the bearing to remove the bearing, however, it
will be necessary to file away the old stake metal
for proper clearance for the new bearing to be installed
into the rotor bore or the bearing may be damaged.
8. Use a J 9398 with the J 8092 in order to drive the
bearing out of the rotor hub.
Clutch Rotor and/or Bearing Removal
(V7 - Direct Mount)
Tools Required
• J 33023-A Puller Pilot
• J 41552 Compressor Pulley Puller
• J 41790 Compressor Holding Fixture
1.
Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture, J 41790 in
a vise and attach the compressor to the J 41790.
3. Remove the clutch plate arid hub assembly. Refer
to Compressor Clutch Plate and Hub Assembly
Removal (V7 - Direct Mount).
4. Using external snap ring pliers (1 ), remove the
clutch rotor and bearing assembly retaining ring (3).
(