GMC chervolet camaro 1999 Service Manual page 274

Steering
2. Connect the outer tie rod assembly (2) to the
steering knuckle (1 ).
3. Connect the hex slotted nut (2) to the outer
tie rod stud (1).
Notice:
Refer to Fastener Notice in Cautions
and Notices.
Tighten
Tighten the hex slotted nut (2) to 47 N·m (35 lb ft).
Align the cotter pin slot by tightening the hex
slotted nut (2) up to 1/6 additional turn, or
70 N·m (52 lb ft) maximum. Do not back off the
hex slotted nut (2) for the cotter pin (3) insertion.
4. Install the cotter pin (3) into the hole in the
tie rod stud.
Important:
Be sure the rack and pinion boot is not
twisted or puckered during toe adjustment.
5. Adjust toe by turning the inner tie rod. Follow
recommended manufacturer specifications;
refer to Steering Gear Adjustments.
Tighten
Tighten the hex jam nut against the outer
tie rod to 68 N·m (50 lb ft).
Power Steering System 2-43
2
297628
3
1
2y
~
I
423439