Brakes
6. Lubricate the brake pedal pin (10) with chassis
lubricant.
7.
Install the following components to the brake
pedal pin (10):
• The brake pedal pushrod pin retainer (7)
• The brake pedal pushrod (8)
• The brake pedal pushrod washer (11)
8.
Install the left side instrument panel insulator.
Refer to Insulator Replacement - IP (Left Side)
in Instrument Panel, Gages, and Console.
9.
Connect the negative battery cable.
Tighten
Tighten the negative battery cable to
15 N,m (11 lb ft).
10. Adjust the following components. Refer to
Stop/amp Switch Adjustment.
• Cruise control release switch
• Stoplamp and TCC switch
• Cruise c9ntrol clutch switch or cruise control
clutch anticipate switch
Hydraulic Brakes 5-31
182817