Tilt Spring - Assemble - GMC chervolet camaro 1999 Service Manual

2-92 Steering Wheel and Column - Tilt
343845
343856
343856
Steering
6. Rotate the tool bolt clockwise with the wrench
until it contacts the surface of the tool block.
I
7. Make a
V4
turn counter clockwise to the hexagon \.
section on the end of the tool bolt.
8. Unscrew the tool bolt until the wheel tilt spring
and the spring retainer (1) are free.
9. Remove the spring retainer (2) from the steering
column housing assembly.
10. Remove the wheel tilt spring (1) from the steering
column housing assembly.
11. Remove the spring guide (3) from the steering
column housing assembly.
Tilt Spring - Assemble
Assembly Procedure
Tool Required
J 39246 Tilt Spring Compressor
1. Install the spring guide (3) to the steering column
housing assembly.
2. Lubricate the wheel tilt spring (1) with
lithium grease.
3. Install the wheel tilt spring (1) to the steering
column housing assembly.
4. Install the spring retainer (2) to the steering
column housing assembly.
(