Tilt Wheel/Column Connector End Views; Diagnostic Information And Procedures; Auto Trans Shift Lock Control System Check - GMC chervolet camaro 1999 Service Manual

Steering Steering Wheel and Column - Tilt 2-59
Tilt Wheel/Column Connector End Views
Brake Transmission Shift Interlock (BTSI)
Solenoid
Connector Part
Information
Pin
A
8
Wire Color
TAN/WHT
DKGRN/
WHT
• 1205-2832
• 2 Way F Metri-Pack 150
Series {BLK)
Circuit
No.
816
1135
Function
Park Neutral position
Power feed
280768
Diagnostic lnformation·and Procedures
Auto Trans Shift Lock Control System Check
Step Action
Normal Result{s)
Abnormal Result{s)*
1. Make sure the gearshift
Brake transmission interlock solenoid
AIT Shift Lock Control Always On
selector into the PARK position.
disengages and allows driver to With lgn in RUN
2. Turn the ignition switch to the
move gearshift selector from PARK
to NEUTRAL.
1
RUN position.
3. Depress the brake pedal
and hold.
4. Move the gearshift selector to
the NEUTRAL position.
1. Depress the brake pedal
Gearshift selector does not move Auto Trans Shift Lock Control
and hold.
from the PARK position. Inoperative
2. Place the gearshift selector into
the PARK position.
2
3. Remove all foot pressure from
the brake pedal.
4. Attempt to move the gearshift
selector from PARK to the
NEUTRAL position.
* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.