2-28
Power Steering System
1
3
2
354423
1
3
354420
Steering
10. Unplug the reservoir hose at the fluid reservoir
inlet connector.
11. Turn the engine off.
(
12. Fill
the fluid reservoir to the
C
mark on the fluid
level indicator.
13. Bleed the power steering system. Refer toB/eeding
Power Steering System in
Power Steering.
Power Steering Hoses Replacement
Removal Procedure
1. Place drain pan(s) under vehicle under steering
gear and pump.
2. Raise and suitably support vehicle. Refer to Lifting
and Jacking the Vehicle in General Information.
3. Remove power steering gear inlet (3) and outlet
(2) hoses from steering gear (1 ).
4. Lower vehicle.
5. Remove the serpentine belt.
6. Remove the power steering pump pulley. Refer to
Power Steering Pulley Replacement for L36 V6 or
Power Steering Pulley Replacement for LS1 V8.
7. Remove inlet hose fitting (3) from
pump (1) (L36 shown, LS1 similar).
(