GMC chervolet camaro 1999 Service Manual page 378

Suspension
10. Insert J 39642 -1 on the shock absorber nut, then
insert J 39642 -2 through J 39642 -1 in order to
hold the shock absorber rod in place.
11.
Remove the shock absorber nut with J 39642
-1
while holding the shock absorber rod from rotating
with J 39642
-2.
12.
Discard the shock absorber nut.
13. Turn J 34013-8 clockwise in order to fully relieve
spring pressure.
Assembly Procedure
Tools Required
• J 34013-8 Strut Spring Compressor
• J 34013 - 114 Modular Shock Compressor
Adapter
• J 34013 - 88
Strut Compressor Adapter
• J 39642 Modular Shock Nut Removal Set,
15 mm (0.60 in)
• J 34013 - 115 Modular Alignment Rod
1. Install J34013-114to J34013-8.
2. Use wing nuts in order to secure the tool to the
following mounting holes:
• For the driver-side shock absorber
- C-H (lower left corner)
- P (upper right corner)
• For the passenger-side shock absorber
- A-X-P (upper left corner)
- C-H (lower right corner)
3. Install
J 34013 - 114 and J 34013 - 88.
Front Suspension 3-37
J
34013-114
J 34013-88
J-344C
J
34013-B
J 34013- B Strut Spring Compressor
Read 1-.iclion Sheet J 34013
'19/ZlA
BoloreUslng
C-H-E/K
J-N-L
Nova Twin-Cam
Nt:NA
..J
I
z
I
..,
181087
181084