Hydraulic Cylinder - Kubota M5040 Workshop Manual

M5040, M6040, M7040, WSM

[4] HYDRAULIC CYLINDER

The external type hydraulic cylinders are used for 3-
point linkage system. This hydraulic cylinder is single
acting type, and it is installed directly between hydraulic
lift arms.
The main components of the hydraulic cylinder are
shown in the figure.
(1) Dust Seal
(2) Circlip
(3) Head
(4) O-ring
(5) Bushing
(6) Cylinder Tube
(7) Rod
(8) Circlip
8-M9
HYDRAULIC SYSTEM
(9) Wear Ring
(10) Seal
(11) Piston
A : To Transmission Case
B : To or From Position
Control Valve
W1015282
KiSC issued 06, 2008 A