Kubota M5040 Workshop Manual page 216

M5040, M6040, M7040, WSM
5. DISASSEMBLING AND ASSEMBLING
[1] PREPARATION
(1) Separating Engine from Clutch Housing (ROPS Model)
Draining Fuel and Transmission Fluid
1. Refer to "7. CHECK
LUBRICANTS, FUEL AND COOLANT" at "G. GENERAL"
section.
Bonnet
1. Open the bonnet (1) and disconnect the negative battery
terminal.
2. Disconnect the connectors (2) for head lights.
3. Disconnect the dampers (4).
4. Remove the bonnet (1) and side cover (3) (R.H) (L.H.).
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable first.
(1) Bonnet
(2) Connector
2-S10
AND MAINTENANCE" and "4.
(3) Side Cover
(4) Damper
CLUTCH
W1039800
W1044829
KiSC issued 06, 2008 A