Kubota M5040 Workshop Manual page 285

M5040, M6040, M7040, WSM
Shuttle Gear Case
1. Unscrew the detent screw (1) and remove the spring (2) and ball
(3).
2. Tap out the input shaft (6) and remove the input shaft assembly
with shift fork (4) and rod (5).
(When reassembling)
• Assemble the input shaft assembly, shuttle shift assembly and
shift fork with rod together.
• Apply grease to the oil seal.
(1) Detent Screw
(2) Spring
(3) Ball
3-S32
TRANSMISSION
(4) Shift Fork
(5) Rod
(6) Input Shaft
W1015764
KiSC issued 06, 2008 A