M5040, M6040, M7040, WSM
Power Steering Pipe and Oil Cooler Pipe
1. Disconnect the power steering pipe (1).
2. Disconnect the oil cooler pipe (2).
3. Remove the steering joint shaft (3).
4. Disconnect the heater hoses (4).
5. Disconnect the breather hose (5) and grounding wire (6).
(When reassembling)
Power steering pipe
retaining nut
Tightening torque
Oil Cooler pipe retaining
nut
(1) Power Steering Pipe
(2) Oil Cooler Pipe
(3) Steering Joint Shaft
2-S17
CLUTCH
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
(4) Heater Hose
(5) Breather Hose
(6) Grounding Wire
W1043207
KiSC issued 06, 2008 A