Kubota M5040 Workshop Manual page 150

M5040, M6040, M7040, WSM
Air Cleaner Hose and Battery Cable
1. Disconnect the air cleaner hose (1).
2. Disconnect the battery cable (2) from the starter terminal B.
(When reassembling)
Starter's B terminal
Tightening torque
mounting nut
(1) Air Cleaner Hose
Condenser and Compressor (CABIN Model)
1. Remove the air conditioner belt (2).
2. Remove the compressor (3) and condenser (4) without removing
the air conditioner hoses.
3. Disconnect the heater hoses (1).
(When reassembling)
• Take care not to damage the air condenser fin.
• After reassembling the compressor, be sure to adjust the air
condenser belt tension.
MAINTENANCE" at "G. GENERAL" section.)
(1) Heater Hose
(2) Belt
1-S24
9.8 to 11.8 N·m
1.0 to 1.2 kgf·m
7.2 to 8.7 lbf·ft
(2) Battery Cable
W1055587
(Refer to "7. CHECK
(3) Compressor
(4) Condenser
W1056102
ENGINE
AND
KiSC issued 06, 2008 A