Kubota M5040 Workshop Manual page 94

M5040, M6040, M7040, WSM
Cylinder Safety Valve Setting Pressure Adaptor
Application : Use to adapt the safety valve to the nozzle tester to measure cracking pressure and test the check valve
on the safety valves.
A 45 mm (1.77 in.)
B 40 mm (1.58 in.)
C 35 mm (13.8 in.)
D 23 to 23.3 mm (0.9055 to 0.9713 in.)
E 16 mm (0.63 in.)
F 40 mm dia. (1.58 in. dia.)
G 32.4 to 32.7 mm dia. (1.2756 to 1.2874 in. dia.)
H 21 mm dia. (0.83 in. dia.)
I 20 to 20.05 mm dia. (0.7874 to 0.7894 in. dia.)
J 2.5 to 2.59 mm (0.0984 to 0.1097 in.)
K 0.79 rad (45 °)
L 0.26 rad (15 °)
M12 × P1.5
M
N 10 mm dia. (0.39 in. dia.)
O 7.5 mm dia. (0.3 in. dia.)
P 1.05 rad (60 °)
Q 3 mm dia. (1.18 in. dia.)
R 36 mm (1.18 in.)
S 60 mm (2.36 in.)
T 5 mm (0.20 in.)
U 10 mm (0.39 in.)
M30 × P1.5
V
W 0.52 rad (30 °)
X 8 mm dia. (0.32 in. dia.)
Y 19 mm (0.75 in.)
Z 10 mm (0.39 in.)
G-72
G GENERAL
KiSC issued 06, 2008 A