M5040, M6040, M7040, WSM
Steering Cylinder
1. Remove the cylinder cover.
2. Disconnect the power steering delivery hoses (3).
3. Remove the cylinder clamps (1).
4. Take out the steering cylinder (2).
(When reassembling)
• If the hose joint (4) was removed, apply teflon tape and fix the
direction as shown in the figure.
Cylinder clamp nut
Cylinder clamp lock nut
Cylinder cover mounting
Tightening torque
screw
Power steering delivery
hose
Hose joint
(1) Cylinder Clamp
(2) Steering Cylinder
(3) Power Steering Delivery Hose
(4) Hose Joint
7-S10
STEERING
34.3 to 39.2 N·m
3.5 to 4.0 kgf·m
25.3 to 28.9 lbf·ft
39.2 to 45.1 N·m
4.0 to 4.6 kgf·m
28.9 to 33.3 lbf·ft
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
22.6 to 27.5 N·m
2.3 to 2.8 kgf·m
16.6 to 20.3 lbf·ft
29.4 to 34.3 N·m
3.0 to 3.5 kgf·m
21.7 to 25.3 lbf·ft
F : Front
R : Rear
a : 0.17 rad (10 °)
b : 0.35 rad (20 °)
W1023157
KiSC issued 06, 2008 A