Kubota M5040 Workshop Manual page 544

M5040, M6040, M7040, WSM
Preparation 5
1. Disconnect the clutch cable (1).
2. Disconnect the shuttle cable (2).
3. Remove the brake rod (3) (R.H., L.H.).
4. Remove the 4WD shift rod (4).
(When reassembling)
• Be sure to adjust the clutch cable for the clutch pedal free travel.
(Refer to "4. CHECKING AND ADJUSTING" at "2. CLUTCH"
section.)
• Be sure to adjust the shuttle cable for the shuttle lever neutral
position. (Refer to "4. CHECKING AND ADJUSTING" at "3.
TRANSMISSION" section.)
(1) Clutch Cable
(2) Shuttle Cable
10-S36
(3) Brake Rod
(4) 4WD Shift Rod
W1028272
KiSC issued 06, 2008 A
CABIN