3-Point Hitch; Separating Hydraulic Cylinder From Tractor Body (Rops Model) - Kubota WSM B2050 Workshop Manual

B2050, B2350, B2650, B3150, WSM

(2) 3-Point Hitch

(3) Separating Hydraulic Cylinder From Tractor Body (ROPS Model)

3-Point Hitch
1. Remove the top link.
2. Remove the lift rods.
3. Remove the check chains.
4. Remove the lower links.
5. Loosen the lock nut (6) and remove the set screw (5).
6. Remove the lower link pin (7).
(When reassembling)
IMPORTANT
• Be sure to align the set screw (5) and lower link pin hole (8),
when installing the lower link pin (7).
Set bolt of the lower link pin
Tightening torque
Lock nut of the lower link
pin
(1) Top Link
(2) Lift Rod
(3) Lower link
(4) Check Chain
Battery Negative Cable
1. Disconnect the battery negative cable (2).
(1) Battery
8-S13
HYDRAULIC SYSTEM
15 to 20 N·m
1.6 to 2.0 kgf·m
11 to 14 lbf·ft
43 to 47 N·m
4.4 to 4.7 kgf·m
32 to 34 lbf·ft
(5) Set Screw
(6) Lock Nut
(7) Lower Link Pin
(8) Lower Link Pin Hole
9Y1210982HYS0013US0
(2) Battery Negative Cable
9Y1210982HYS0014US0
KiSC issued 03, 2014 A