Kubota M5040 Workshop Manual page 295

M5040, M6040, M7040, WSM
Removing Rear Axle Case
1. Remove the rear axle case mounting screws and nuts.
2. Remove the rear axle case assembly (1).
(When reassembling)
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face.
Rear axle case mounting
Tightening torque
screw and nut
(1) Rear Axle Case Assembly
PTO Gear Case
1. Remove the PTO cover (1).
2. Remove the PTO gear case assembly (2).
(When reassembling)
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face.
PTO gear case mounting
Tightening torque
screw
(1) PTO Cover
Brake Cam Plate
1. Remove the return spring (1).
2. Remove the brake cam plate (2).
(When reassembling)
• Apply grease to the brake ball seats.
excessively.)
(1) Return Spring
Differential Lock Fork
1. Remove the clevis pin (3) and plug (1).
2. Draw out the differential lock shaft (5).
3. Take out the differential lock shift fork (2) and spring (4).
(When reassembling)
• Apply grease to the oil seal.
(1) Plug
(2) Differential Lock Shift Fork
(3) Clevis Pin
(4) Spring
3-S42
TRANSMISSION
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.3 lbf·ft
W1025554
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(2) PTO Gear Case
W1025829
(Do not grease
(2) Brake Cam Plate
W1026106
(5) Differential Lock Shaft
(6) Shim
(7) Oil Seal
W1021807
KiSC issued 06, 2008 A