Kubota M5040 Workshop Manual page 230

M5040, M6040, M7040, WSM
[4] PTO CLUTCH VALVE
Disassembling PTO Clutch Valve
1. Remove the external circlip (1), lever (2) and oil seal (3).
2. Remove the external circlip (4) and draw out the spool (17).
3. Remove the cap nut (11) and lock nut (12).
4. Remove the adjuster (13) and relief body (10).
5. Draw out the relief sleeve (6) and relief poppet (7).
6. Draw out the spring seat (9) and spring (14).
(When reassembling)
• When assembling the PTO clutch valve, adjust the PTO relief valve setting pressure (refer to "4. CHECKING AND
ADJSUTING" in this section).
2-S24
CLUTCH
(1) External Circlip
(2) Lever
(3) Oil Seal
(4) External Circlip
(5) Washer
(6) Relief Sleeve
(7) Relief Poppet
(8) Push Pin
(9) Spring Seat
(10) Relief Body
(11) Cap Nut
(12) Lock Nut
(13) Adjuster
(14) Spring
(15) O-ring
(16) Plug (Check Port)
(17) Spool
W1077641
KiSC issued 06, 2008 A