Kubota M5040 Workshop Manual page 308

M5040, M6040, M7040, WSM
Backlash between Differential Pinion and Differential Side Gear
1. Set a dial indicator (lever type) on the tooth of the differential
pinion.
2. Hold the differential side gear and move the differential pinion to
measure the backlash.
3. If the measurement is not within the factory specifications, adjust
with the differential side gear washer.
Factory spec.
Backlash between
differential pinion and
differential side gear
Allowable limit
(Reference)
• Thickness of differential side gear washer :
1.5 mm (0.059 in.)
1.6 mm (0.063 in.)
1.7 mm (0.067 in.)
1.8 mm (0.071 in.)
2.0 mm (0.078 in.)
(1) Side Gear Washer
Clearance of Differential Lock Shifter
1. Measure the clearance (L) between differential lock shifter and
differential case when the differential lock pedal OFF position.
2. If the measurement is not within the factory specifications, adjust
with adjusting shim (2).
Clearance (L) Factory spec.
(Reference)
• Thickness of adjusting shim :
0.5 mm (0.020 in.)
1.0 mm (0.039 in.)
(1) Plug
(2) Adjusting Shim (0.5 mm, 0.0197 in.)
3-S55
TRANSMISSION
0.15 to 0.30 mm
0.0059 to 0.0118 in.
0.4 mm
0.016 in.
W1030074
6.0 to 8.0 mm
0.236 to 0.315 in.
(3) Shift Fork
W1030398
KiSC issued 06, 2008 A