Kubota M5040 Workshop Manual page 236

M5040, M6040, M7040, WSM
Thickness of Seal Ring
1. Measure the thickness of seal rings (1) with an outside
micrometer.
2. If the measurement is less than the allowable limit, replace it.
Factory spec.
Thickness of seal ring
Allowable limit
(1) Seal Ring
2-S30
CLUTCH
2.45 to 2.50 mm
0.096 to 0.098 in.
2.0 mm
0.079 in.
W1025453
KiSC issued 06, 2008 A