Kubota M5040 Workshop Manual page 261

M5040, M6040, M7040, WSM
Adjusting Shuttle Shift Neutral Position and Lever Guide
Neutral Position
1. The synchro shuttle shift rod is provided with F, N and R ball
detents. (Lift the shuttle lever (1) and slowly move it to the F and
R directions until you feel the lever clicking at the ball detents.)
2. The steering column also has the f, n and r grooves for the
shuttle lever.
3. In this adjustment procedure, make alignment between the
shuttle valve neutral detent position and shuttle lever guide
groove N.
4. If the neutral position is incorrect, adjust with cable retaining nuts.
(1) Shuttle Lever
(2) Shuttle Lever Guide
F : Forward
R : Reverse
N : Neutral
3-S8
TRANSMISSION
(f) Groove F
(n) Groove N
(r) Groove R
W1010854
KiSC issued 06, 2008 A