Kubota M5040 Workshop Manual page 287

M5040, M6040, M7040, WSM
Assembling Procedure for Disc Type Synchromesh
1. Install the holder 1 (1) to gear (2).
2. Install the disc (3) and steel plates (4) alternately.
3. Install the holder 2 (5).
NOTE
• Apply enough transmission fluid to the clutch disc.
• Five steel plates and six clutch discs for one side.
• There is two different thickness steel plate, check and adjust
the clearance between holder 2 (5) and coupling with
changing the steel plate combination (refer to "6.
SERVICING" at this section).
(1) Holder 1
(2) Gear
(3) Disc
3-S34
TRANSMISSION
(4) Steel Plate
(5) Holder 2
W1016613
KiSC issued 06, 2008 A