M5040, M6040, M7040, WSM
PTO Switch
1) Wiring Harness
1. Disconnect the leads from the PTO switch (1).
2. Connect the wiring harness lead terminals to each other and turn
the main switch to "ON" position.
3. If the indicator do not light, the fuse, wiring harness or bulb is
faulty.
2) PTO Switch Continuity
1. Check the continuity with an ohmmeter across the switch
terminals.
2. If it does not conduct or any value is indicated when the switch is
pushed, the switch is faulty.
3. If infinity is not indicated when the switch is released, the switch
is faulty.
Resistance
Reference
(Across switch
value
terminals)
(1) PTO Switch
Shuttle Neutral Switch
1) Shuttle Neutral Switch Continuity
1. Check the continuity with an ohmmeter across the switch
terminals.
2. If it does not conduct or any value is indicated when the switch is
pushed, the switch is faulty.
3. If infinity is not indicated when the switch is released, the switch
is faulty.
Resistance
Reference
(Across switch
value
terminals)
(1) Shuttle Neutral Switch
9-S26
ELECTRICAL SYSTEM
0 Ω
When switch is pushed (P)
When switch is released
Infinity
(R)
P : Pushed
R : Released
0 Ω
When switch is pushed (P)
When switch is released
Infinity
(R)
[A] Hydraulic Shuttle Model
[B] Synchro Shuttle Model
P : Pushed
R : Released
W1025931
W1029574
KiSC issued 06, 2008 A