Hydraulic Cylinder - Kubota M8540 Workshop Manual

M8540, M9540, WSM

[4] HYDRAULIC CYLINDER

The external type hydraulic cylinders are used for 3-
point linkage system. This hydraulic cylinder is single
acting type, and it is installed directly between hydraulic
lift arms.
The main components of the hydraulic cylinder are
shown in the figure.
(1) Dust Seal
(2) Circlip
(3) Head
(4) O-ring
(5) Bushing
(6) Cylinder Tube
(7) Rod
(8) Circlip
8-M15
HYDRAULIC SYSTEM
(9) Wear Ring
(10) Seal
(11) Piston
A : To Transmission Case
B : To or From Position
Control Valve
W1015282
KiSC issued 09, 2008 A