Kubota M5040 Workshop Manual page 421

M5040, M6040, M7040, WSM
Installing Piston Seal
1. Place the slide jig (2) on the piston (3).
2. Install the piston seal (1) to the piston using the slide jig. (Refer
to "SPECIAL TOOLS" section)
3. Compress the piston seal to the correct size by installing the
piston into the correcting jig (5).
NOTE
• Do not turn (roll) the piston seal as you install it.
(1) Piston Seal
(2) Slide Jig
(3) Piston
8-S23
HYDRAULIC SYSTEM
(4) Bearing Ring
(5) Correcting Jig
W1052958
KiSC issued 06, 2008 A