Kubota M5040 Workshop Manual page 351

M5040, M6040, M7040, WSM
Front Axle
1. Take out the collar (5).
2. Tap out the axle (1).
(When reassembling)
• Install the oil seal (8) of front wheel case cover (2), noting its
direction as shown in the figure below.
• End play of axle shaft adjusts with shim (3) to 0.1 mm (0.004 in.)
or less while front wheel case and front wheel case cover were
assembled.
• Install the shims (3) to their original position.
(Reference)
• Thickness of shim (3) :
0.1 mm (0.004 in.)
0.2 mm (0.008 in.)
(1) Axle
(2) Front Wheel Case Cover
(3) Shim
(4) Bearing
6-S14
FRONT AXLE
(5) Collar
(6) Bevel Gear
(7) Bearing
(8) Oil Seal
W1024776
KiSC issued 06, 2008 A