M5040, M6040, M7040, WSM
LSD Disc and Steel Plate
1. Draw out the LSD side gear (4), LSD shim (5), steel plates (3),
LSD discs (6) and belleville washers (cupped spring washer) (2).
(When reassembling)
• Apply transmission fluid to the LSD discs.
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
side gear and shim.
• Assemble the belleville washers (cupped spring washer) as
shown in the figure.
• Check the slip torque of LSD after assembly, the differential refer
to "[4] SERVICING" at this section.
(1) Differential Case Cover
(2) Belleville Washer (Cupped Spring
Washer)
(3) Steel Plate
6-S17
FRONT AXLE
(4) LSD Side Gear
(5) LSD Shim
(6) LSD Disc
W1019850
KiSC issued 06, 2008 A