Kubota M5040 Workshop Manual page 362

M5040, M6040, M7040, WSM
Front Bracket and Rear Bracket Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (L), replace it.
Front bracket and rear
Alloy thickness (L)
bracket bushing
Rear differential case
Factory spec.
boss O.D.
Front differential case
Factory spec.
boss O.D.
Bearing Retainer and Front Wheel Case Support Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (L), replace it.
Front wheel case
Alloy thickness (L)
support bushing
Bearing retainer O.D. Factory spec.
6-S25
FRONT AXLE
0.57 mm
0.0224 in.
89.965 to 90.000 mm
3.5420 to 3.5433 in.
59.97 to 60.000 mm
2.3611 to 2.3622 in.
W1020171
0.57 mm
0.0224 in.
59.97 to 60.00 mm
2.36101 to 2.36220 in.
W1020339
KiSC issued 06, 2008 A