Kubota M5040 Workshop Manual page 49

M5040, M6040, M7040, WSM
Lubricating Grease Fittings
1. Apply a small amount of multipurpose grease to following points
every 100 hours.
2. If you operated the machine in extremely wet and muddy
condition, lubricate grease fittings more often.
(1) Battery Terminals
(2) Grease Fitting (Front Axle Support)
(3) Grease Fitting (Front Axle Support)
(4) Grease Fitting (Knuckle Shaft)
[RH, LH]
(5) Grease Fitting (Front Axle Gear
Case Support) [RH, LH]
(6) Grease Fitting (Top Link Bracket)
(7) Grease Fitting (Lifting Rod)
G-27
G GENERAL
(8) Grease Fitting (Top Link)
(9) Grease Fitting (Hydraulic Lift
Cylinders Pin)
(10) Steering Joint Shaft
[A] 2WD Model
[B] 4WD Model
[C] CABIN Model
W1025259
KiSC issued 06, 2008 A