Kubota M5040 Workshop Manual page 307

M5040, M6040, M7040, WSM
Clearance between Differential Case Bore (39T Bevel Gear
Bore) and Differential Side Gear Boss
1. Measure the bore I.D. of the differential case and 39T bevel gear.
2. Measure the differential side gear boss O.D. and calculate the
clearance.
3. If the clearance exceeds the allowable limit, replace them.
Clearance between
Factory spec.
differential case bore
and differential side gear
Allowable limit
boss
Differential case bore
Factory spec.
I.D.
Differential side gear
Factory spec.
boss O.D.
Clearance between 39T
Factory spec.
bevel gear bore and
differential side gear
Allowable limit
boss
39T bevel gear bore I.D. Factory spec.
Differential side gear
Factory spec.
boss O.D.
Clearance between Differential Pinion Shaft and Differential
Pinion
1. Measure the differential pinion shaft O.D.
2. Measure the differential pinion I.D. and calculate the clearance.
3. If the clearance exceed the allowable limit, replace them.
Factory spec.
Clearance between
differential pinion shaft
and differential pinion
Allowable limit
Differential pinion shaft
Factory spec.
O.D.
Differential pinion I.D. Factory spec.
3-S54
TRANSMISSION
0.08 to 0.181 mm
0.004 to 0.00712 in.
0.35 mm
0.014 in.
40.53 to 40.592 mm
1.5960 to 1.5981 in.
40.411 to 40.45 mm
1.5910 to 1.592 in.
0.09 to 0.169 mm
0.004 to 0.00665 in.
0.35 mm
0.014 in.
40.54 to 40.58 mm
1.596 to 1.597 in.
40.411 to 40.45 mm
1.591 to 1.592 in.
W1029389
0.08 to 0.122 mm
0.004 to 0.0048 in.
0.25 mm
0.010 in.
20.06 to 20.081 mm
0.7898 to 0.79059 in.
19.959 to 19.980 mm
0.78579 to 0.7866 in.
W1029788
KiSC issued 06, 2008 A