Kubota M5040 Workshop Manual page 277

M5040, M6040, M7040, WSM
Hydraulic Control Rod, Shift Change Rod and Wire
1. Disconnect the position control rod (6) and draft control rod (5).
2. Remove the differential lock rod (4).
3. Disconnect the auxiliary hydraulic control wire (7) from auxiliary
hydraulic control valve.
4. Disconnect the main shift change rod (1) and H-L change shift
rod (3).
5. Disconnect the select wire (8).
6. Disconnect the accelerator wire (2).
NOTE
• After assembling check the speed change lever movement
and adjust them if necessary.
• After assembling check the hydraulic control rod and
auxiliary control system. (Refer to "4. CHECKING AND
ADJUSTING" at "8. HYDRAULIC SYSTEM" section.)
(When reassembling)
Main shift rod length (L) Reference value
(1) Main Shift Change Rod
(2) Accelerator Wire
(3) H-L Change Shift Rod
(4) Differential Lock Rod
(5) Draft Control Rod
Step and Center Frame
1. Disconnect the trailer coupler harness (5).
2. Remove the grip (1).
3. Remove the seat support (2).
4. Disconnect the lowering speed rod (4).
5. Remove the step and center frame (3) as a unit.
(1) Grip
(2) Seat Support
(3) Step and Center Frame
Steering Support Unit
1. Remove the PTO delivery pipe (2).
2. Remove the power steering pipe (3).
3. Remove the brake rod 1 (4) (R.H.), (L.H.) and brake rod 2 (6)
(R.H.), (L.H.).
4. Remove the wire harness (1) and steering support unit (7) as
shown photo.
5. Disconnect the clutch cable (8) from shuttle valve (10).
6. Disconnect the shuttle cable (9) from shuttle valve (10).
7. Remove the steering support unit (5) as shown photo.
(When reassembling)
PTO delivery pipe joint
screw
Tightening torque
Power steering pipe
retaining nut
(1) Wire Harness
(2) PTO Delivery Pipe
(3) Power Steering Pipe
(4) Brake Rod 1
(5) Steering Support Unit
3-S24
TRANSMISSION
Approx. 262 mm
10.32 in.
(6) Position Control Rod
(7) Auxiliary Hydraulic Control Wire
(8) Select Wire
L : Length
W1015486
(4) Lowering Speed Rod
(5) Trailer Coupler Harness
W1015706
29.4 to 34.3 N·m
3.0 to 3.5 kgf·m
21.7 to 25.3 lbf·ft
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
(6) Brake Rod 2
(7) DT Rod
(8) Clutch Cable
(9) Shuttle Cable
(10) Shuttle Valve
W1015833
KiSC issued 06, 2008 A