Rep 5.0.24 Back Frame; Rep 5.0.25 Flash Disk - Xerox Phaser 8560MFP Service Documentation

REP 5.0.24 Back Frame

Parts List on PL 5.0
Removal
1. Remove the Scanner Assembly with attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
3. Remove the Left Side Cover (REP 1.0.7).
4. Remove the Right Side Cover (REP 1.0.21).
5. Remove the Rear Cover (REP 1.0.20).
6. Remove the Ink Loader (REP 2.0.1).
7. Remove the Scanner Power Supply Fan (REP 4.0.3).
8. Remove the Exit Module Board (REP 5.0.1).
9. Remove the Scanner Power Supply (REP 5.0.2) and mylar insulator.
10. Remove the Electronics Module (REP 5.0.5).
11. Remove the Printer Stabilizer (REP 3.0.14).
12. Remove 7 (metal, T-20) screws that secure the Back Frame to the chassis.
Figure 1 Removing the Back Frame
Initial Issue
Phaser 8510/8560MFP Multifunction Product

REP 5.0.25 Flash Disk

Parts List on PL 5.0
Removal
1. Loosen the thumbscrews on the back cover of the Electronics Module.
2. Exchange the Flash Disk devices.
Figure 1 Removing the Flash Disk
10/2006
4-63
Repairs and Adjustments
REP 5.0.24 , REP 5.0.25