Rep 5.0.1 Exit Module Control Board; Rep 5.0.2 Scanner Power Supply - Xerox Phaser 8560MFP Service Documentation

REP 5.0.1 Exit Module Control Board

Parts List on PL 5.0
Removal
1. Remove the Scanner Assembly with attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
3. Remove the Left Side Cover (REP 1.0.7).
4. Remove the Right Side Cover (REP 1.0.21).
5. Remove the Rear Cover (REP 1.0.20).
6. Disconnect all connections to the Exit Module Board.
7. Remove 2 (metal, T-20) screws that secure the board to the Back Frame.
Figure 1 Removing the Exit Module Control Board
Repairs and Adjustments
REP 5.0.1, REP 5.0.2

REP 5.0.2 Scanner Power Supply

Parts List on PL 5.0
Removal
Disconnect the AC Power Cord before servicing the system. The Scanner Power Supply
connects directly to the AC Line.
1. Remove the Scanner Assembly with attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
3. Remove the Left Side Cover (REP 1.0.7).
4. Remove the Right Side Cover (REP 1.0.21).
5. Remove the Rear Cover (REP 1.0.20).
6. Disconnect all connections to the Scanner Power Supply.
7. Remove 4 (metal, T-20) screws that secure the Scanner Power Supply to the Back Frame.
Figure 1 Removing the Scanner Power Supply
10/2006
4-58
WARNING
Phaser 8510/8560MFP Multifunction Product
Initial Issue