Xerox Phaser 8560MFP Service Documentation page 129

Figure 2 Lowering the Printhead Wiper Assembly
9. Move the Printhead Tilt Spring from its position on the Printhead and hook it behind itself
as shown in Figure 3.
Initial Issue
Phaser 8510/8560MFP Multifunction Product
Figure 3 Releasing the Printhead Tilt Spring.
10. Pull the X-Axis Bias Spring and Hook out slightly, and then rotate downward to allow it to
rest in detents provided on the frame. See Figure 4.
10/2006
4-15
Repairs and Adjustments
REP 2.0.2