Rep 6.0.2 Front Door And Exit Door Interlock Switches - Xerox Phaser 8560MFP Service Documentation

REP 6.0.2 Front Door and Exit Door Interlock Switches

Parts List on PL 6.0
Removal
The same part is used for both the Front Door and Exit Door Interlocks, Use this procedure to
replace either interlock switch.
NOTE: Replacement of the Front Door Interlock Switch does not require removal of the Outer
Duplex Guide
1. Remove the Scanner Assembly with attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
NOTE: Removal of the Outer Duplex Guide is not required to replace the Front Door Inter-
lock Switch.
3. Remove the Outer Duplex Guide (REP 3.0.6).
4. Remove the defective switch from the Outer Duplex Guide.
Figure 1 Removing the Front Door Interlock Switch
Initial Issue
Phaser 8510/8560MFP Multifunction Product
Figure 2 Removing the Exit Door Interlock Switch
10/2006
4-65
Repairs and Adjustments
REP 6.0.2