Xerox Phaser 8560MFP Service Documentation page 295

Figure 23 Exit Path
Initial Issue
Phaser 8510/8560MFP Multifunction Product
Transfix and Print Speeds
Table 1 Transfix and Print Speeds
Characteristic
Peak transfix speed (Simplex)
Peak transfix speed (Duplex)
Peak Transfix Speed (Legal)
Peak transfix speed (Tray 1)
First Sheet Transfix Speed
Peak Transfix Speed
Table 2 Approximate Print Speeds
Tray (Source) / Resolution Simplex, A4 Paper
Tray 1
Fast Color (300 x 300 dpi) 10 pages per minute (ppm)
Standard (300 x 450 dpi) 9 ppm
Enhanced (563 x 400 dpi) 8 ppm
High Res/Photo (525 x 2400) 6 ppm
PCL 600 x 300 Mode / 6.5 ppm / 3 ppm
PCL 600 x 600 Mode
Tray 2 ~ 4
Fast Color (300 x 300 dpi) 24 ppm
Standard (300 x 450 dpi) 18 ppm
Enhanced (563 x 400 dpi) 12 ppm
High Res/Photo (525 x 2400) 7 ppm
PCL 600 x 300 Mode / 13 ppm / 6 ppm
PCL 600 x 600 Mode
Configuration Card Parameters
Information stored on the configuration card includes the ethernet address, and personality
parameters. The system model configuration is determined by a combination of system hard-
ware capabilities. Feature value and ethernet address are configured at the factory, and are
"read only". The feature value is fixed in the configuration card, and does not change. Ethernet
address is stored only on the configuration card, and cannot be rewritten. The ethernet
address is not written to the NVRAM chip.
10/2006
8-23
Set Point, Paper Media (inches per second)
Fast Color Standard Enhanced
20 ips 17 ips 13 ips
5 ips 5 ips 5 ips
20 ips 17 ips 13 ips
13 ips 7 ips 7 ips
7 ips 7 ips 7 ips
Set Point, OHP Media
5 ips
Auto Duplex, A4 Paper
10 sides per minute (spm)
9 spm
4 spm
3 spm
15 spm
13 spm
11 spm
7 spm
Theory of Operation
Image Output Terminal
Hi-Res/Photo
7 ips
5 ips
7 ips
7 ips
7 ips